Air Sniper Induct 300W

The Air Sniper Induct 300W Air Treatment System was designed and developed to sanitize the air rather than filter it. We achieved this by maximizing the UVGI output while creating scientifically measured dwell time and molecule contact to ensure the destruction of all unwanted pathogens. The Air Sniper Induct 300W has been designed to fit into existing HVAC systems with ease with a plug and play system and eliminates the need for expensive electrical connections. The UV bulbs have a 5-year lifespan.

30 Day Money Back Guarantee
3 Year Limited Warranty

FEATURES

  • Easy plug and play installation (no need for Electrician)
  • 300W Bulb
  • Wi-Fi Available
  • Produces 0% Ozone
  • Status Indicator
  • Destroys 99.9% of pathogens

SPECIFICATIONS

Power Requirements 100-300 VAC 50/60 Hz
Energy consumption 3.06-1.13 Amps
Weight 15lbs
Control Panel On/Off Switch
Housing material Aluminum
Dimensions 25″ (H) x 10″ (W) x 5.36″ (D)
Electrical safety certification UL and CSA standards
Airflow Airflow sense activation
Operating temp range -25C/+50C
Bulb Status Indicator Yes

Comparison Chart

Air Sniper Inflow 20/20 Air Sniper Inflow 16/36 Air Sniper Inflow 36/36 Air Sniper Induct 300W
Destroys 99.9% of Pathogens
Plug and Play (for easy installation)
Total Watts 30x Ultra High-Intensity 36-Watt UVC lamps (1080 watts total) 50x Ultra High-Intensity 36-Watt UVC lamps (1800 watts total) 100x Ultra High-Intensity 36-Watt UVC lamps (3600 watts total) 300 Watts Total
Ultra-High reflective tunnels 3x Ultra High reflective tunnels (93% UVC reflective factor) 3x Ultra High reflective tunnels (93% UVC reflective factor) 3x Ultra High reflective tunnels (93% UVC reflective factor) Not Applicable
Wi-Fi Enabled for remote monitoring and control Yes Yes Yes Wi-Fi options available
Multitask color touch screen for maintenance and manual monitoring Yes Yes Yes No
Differential pressure sensor on board for any up-stream filter system Yes Yes Yes Yes
Flow control for ON / OFF cycle Yes Yes Yes Yes
OZone Generated 0% 0% 0% 0%
Lamp change recommended after Approx. 13,000 hours of on-time (approx. 3 years) Approx. 13,000 hours of on-time (approx. 3 years) Approx. 13,000 hours of on-time (approx. 3 years) 5 Years
100% UVC exposure along with enough dwell time to achieve maximum irradiation performance and kill ratio of unwanted pathogens Yes Yes Yes Yes

Call or email us, or fill out the form to have one of our customer service specialists get in touch with you.

Bay 11, 6565 – 40th St SE. Calgary, AB T2C 2J9, CA

Phone: +1.888.338.9549

Email: [email protected]

Copyright 2021 AIR, Alpine Innovative Research Inc.

Website & Marketing By CAYK

Top